Product | Himalayan Adhesives

TILE ADHESIVE S10

Home /
Tile and Stone Fixing Solutions /
TILE ADHESIVE S10

TILE ADHESIVE S10

HIMALAYAN ADHESIVE TILE ADHESIVE S10 Is a Pre-mix Cementitious-Polymer-Based-powder, containing Portland cement and sand, which can be mixed with water for installing/fixing big Tiles & Stone on Interior and Exterior walls. With average coverage of 50 To 55 sqft at 4mm Thickness With a Notched Trowel.

Qty. 20Kilogram

Product Specification

Technical Specifications

#	Specification	Description
1	SIZE UPTO IN FEET	Any Size
2	TYPE	Ceramic,Vetrified, Mosaic Tile & Natural, Rough stone
3	APPLICATION AREA CLASSIFICATION	On terraces, wet rooms, balconies, swimming pools and bathrooms, Tile on Tile, On water proof and moisture proof layers
4	SURFACE	Concrete, Cement Mortar Beds, Cement Plaster, Brick Masonry, Block Masonry, Bison Board, tile Etc.
5	COVERAGE	30-35 sq. at 3 mm
6	HEIGHT IN FEET	25 Ft
7	OPEN TIME	30 Minutes
8	POT LIFE	60 Minutes
9	WATER RATIO	30-35% per 20 Kg bag
10	SETTING TIME	24-48 Hours
11	APPLICATION TEMPERATURE	5-50 Degree Celsius
12	BULK DENSITY	1400-1600 KG/m³
13	COLOUR	GREY
14	TENSILE ADHESION DRY CONDITION	1.35 MPa
15	TENSILE ADHESION WET CONDITION	1.29MPa
16	SHEAR ADHESION DRY CONDITION	1.85 N/mm2
17	SHEAR ADHESION HEAT AGING	1.42 N/mm2
18	SHEAR ADHESION WET CONDITION	1.40 N/mm2
19	SLIP AVERAGE	.15 mm
20	DEFORMABLE ADHESIVE	5.78 mm
21	FOLLOWING STANDARD	ANSI A118.4 ET - IS 15477: 2019:TYPE 3 TS1 ADHESIVE - EN 12004 / ISO 13007 : C2TE S1

SIZE UPTO IN FEET

Any Size

TYPE

Ceramic,Vetrified, Mosaic Tile & Natural, Rough stone

APPLICATION AREA CLASSIFICATION

On terraces, wet rooms, balconies, swimming pools and bathrooms, Tile on Tile, On water proof and moisture proof layers

SURFACE

Concrete, Cement Mortar Beds, Cement Plaster, Brick Masonry, Block Masonry, Bison Board, tile Etc.

COVERAGE

30-35 sq. at 3 mm

HEIGHT IN FEET

25 Ft

OPEN TIME

30 Minutes

POT LIFE

60 Minutes

WATER RATIO

30-35% per 20 Kg bag

SETTING TIME

24-48 Hours

APPLICATION TEMPERATURE

5-50 Degree Celsius

BULK DENSITY

1400-1600 KG/m³

COLOUR

GREY

TENSILE ADHESION DRY CONDITION

1.35 MPa

TENSILE ADHESION WET CONDITION

1.29MPa

SHEAR ADHESION DRY CONDITION

1.85 N/mm2

SHEAR ADHESION HEAT AGING

1.42 N/mm2

SHEAR ADHESION WET CONDITION

1.40 N/mm2

SLIP AVERAGE

.15 mm

DEFORMABLE ADHESIVE

5.78 mm

FOLLOWING STANDARD

ANSI A118.4 ET - IS 15477: 2019:TYPE 3 TS1 ADHESIVE - EN 12004 / ISO 13007 : C2TE S1

Specifications

Areas of Application

• Fixing ceramic, vitrified, and natural stone tiles on floors and walls.
• Use in both indoor and outdoor applications.
• Suitable for bathrooms, kitchens, swimming pools, terraces, and other wet or dry areas.

Surface Preparation

• Ensure the surface is clean, dry, level, and free from dust, oil, grease, or loose particles.
• Repair any cracks or uneven areas before application.
• Avoid application on surfaces with standing water or visible dampness.

Mixing Instructions

• Mix the adhesive powder with clean water as per the manufacturer’s ratio to form a smooth, lump-free paste.
• Stir well to achieve a homogeneous consistency.
• Do not add excess water as it may weaken the adhesive properties.
• Let the mixture rest for a few minutes before application.

Application Method

• Use a notched trowel to spread a thin, even layer of adhesive on the surface, working in small sections.
• Hold the trowel at a 45-degree angle to form ridges for improved bonding.
• Place tiles into the adhesive and gently press and twist for full contact.
• Use tile spacers to maintain uniform spacing.
• Adjust tiles while the adhesive is still wet.
• Clean off excess adhesive immediately.
• Allow adhesive to cure as per manufacturer’s recommended time before grouting.

Storage & Shelf Life

• Store in a cool, dry place, away from direct sunlight and moisture.
• Keep the product in its original, tightly sealed packaging.
• Shelf life is typically 12 months from the date of manufacture under proper storage conditions.

Packaging

Available in:20kg

Safety & Precautions

• Wear safety goggles, gloves, and a dust mask to prevent irritation and inhalation of dust.
• Ensure proper ventilation during application.
• Avoid skin and eye contact. Wash immediately with soap and water if contact occurs.
• Do not ingest or handle with food. Seek immediate medical help if swallowed.
• Clean tools immediately after use to prevent hardening.
• Keep out of reach of children and pets.
• Dispose of unused product and packaging as per local environmental regulations.
• Always check the compatibility of the adhesive with your specific tile and surface type.